FUNCTIONAL BEDS 2-SECTION "NURSING CARE" SERIES

  • Bed medical 2-section KFM-2nb-7 AURA

    SPECIFICATIONS
    • • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • • Sizes of bed (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • • Bed height from the floor (without mattress) – 450 mm;
    • • Lifting angle of the main section from 0˚ to 70˚
    • • The mesh used in the production of the bed is electro-welded, 4 mm in diameter with a cell of 50 x 50 mm.
    • • Bed – equipped with folding side rails.
    • • Maximum load – 130 kg.
    • • Weight no more than 50 kg.
  • Electric drive module for functional bed

    SPECIFICATIONS
    • Appointment – beds with functional sections;
    • Mains voltage, 220V;
    • Network frequency, 50 Hz;
    • Emergency power – 2 KRONA elements.
  • Bed medical 2-section KFM-2nb-4 basic

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • The mesh used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
    • Maximum load – 160 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nb-5 basic

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • The net used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
    • Maximum load – 160 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nb-6 basic

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • The mesh used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
    • Maximum load – 160 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nb-3 basic

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • The mesh used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
    • Maximum load – 130 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nb-2 basic

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • The mesh used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
    • Maximum load – 130 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nb-1 basic

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • The mesh used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
    • Maximum load – 130 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nl-2 lite

    SPECIFICATIONS
    • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • Bed dimensions (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • The height of the bed from the floor (without mattress) – 450 mm;
    • Lifting angle of the main section from 0 to 70
    • Bed bed – metal slats. The lamellar basis provides the maximum loading capacity of a design.
    • Maximum load – 160 kg.
    • Weight not more than 50 kg.
  • Bed medical 2-section KFM-2nl-1

    SPECIFICATIONS
    • • Dimensions, mm:
    • – height 840;
    • – width 920;
    • – length 2100;
    • • Sizes of bed (mattress frame):
    • – length – 2000 mm;
    • – width – 900 mm;
    • • Bed height from the floor (without mattress) – 450 mm;
    • • Lifting angle of the main section from 0˚ to 70˚
    • • The mesh used in the production of the bed is electro-welded, 4 mm in diameter with a cell of 50 x 50 mm.
    • • Maximum load – 130 kg.
    • • Weight no more than 50 kg.
Functional bed of the basic version.
To a greater extent, they are used in the care of patients at home.
However, they are also successfully used in clinical settings, due to their design and coating compliance with all requirements for disinfection and reliability.
The 2nd and 4th section are made.
We divided the beds of this family into two groups:
– Functional beds of the LITE series – equipped with the necessary and sufficient functionality. Nothing extra. Budget Series
– Functional beds of the BASIC series – all the same basic functions, plus wheels and removable casters.
All beds we manufacture are equipped with attachments that allow you to add useful features such as folding side rails, vessel holder, long-term infusion stand that can be placed on either side of the bed, and a medical sectional mattress that fits exactly to the section sizes. and bed dimensions
Our mattresses are made from certified medical oilcloth. This allows them to be used in a clinical setting.
All beds are equipped with hooks for hanging a urinal bag.
The sophisticated bed design makes the bed more compact when transported, making it easier to transport. However, at will
We will make an all-welded construction for the customer.
You can also choose the color of the pastel insert or order a bed without chipboard inserts.
The base color of the hull is white, but it can be painted in any color.

Main Menu