Bed for a bedridden patient KFM-4nb-e3 medical functional 4-section electric drive TM OMEGA

It is intended for use in medical institutions, medical hospitals, as well as at home. The bed serves to accommodate patients with various diseases, as well as injured patients and is designed to meet the requirements for accommodating patients with severe diseases of the neurovascular and cardiovascular system, and is also the best choice for injured patients.

The base of the bed is a bed made in the form of a frame structure with one stationary section and three functional sections, which are raised and lowered by an electric drive controlled by a remote control.

The frame is made of a profile thick-walled steel pipe with a section of 20×40. Bed-metal lamellas. The lamellar basis provides the maximum loading capacity of a design. Removable metal blades with chipboard inserts are attached to the frame.

Mesh metal base provides maximum ventilation under the mattress.

The frame of the bed and the side parts of the moving main section have stops that prevent the mattress from shifting during operation.
Fastenings for hanging bags of urinals are made on the lower part of the sidewalls.

All metal structural elements are painted with white powder-polymer paint, which is resistant to treatment with all possible types of disinfectants and has high wear resistance.

All metal parts of products undergo chemical preparation (phosphatation) before coating, which makes the coating of the product more resistant to corrosion and durable in operation.

It is possible to paint the structure with paint of any color as agreed with the Customer.

All materials used in the manufacture of the product are properly certified for use in medical practice.

Specifications:

• • Dimensions, mm:
• – height 840;
• – width 920;
• – length 2100;
• • Sizes of bed (mattress frame):
• – length – 2000 mm;
• – width – 900 mm;
• • Bed height from the floor (without mattress) – 450 mm;
• • Lifting angle of the main section from 0˚ to 70˚
• • Angle of elevation of the foot section – from 0˚ to 45˚
• • The mesh used in the production of the bed is electro-welded, 4 mm in diameter with a cell of 50 x 50 mm.
• • Management: electric
• • Maximum load – 160 kg.
• • Weight no more than 50 kg.