Electric medical bed 4 sections KFM-4nb-e5 AURA

Bed for the lying patient KFM-4nb-e5 AURA medical functional 4-section with the electric drive.

It is intended for use in medical institutions, medical hospitals, as well as at home. The bed serves to accommodate patients with various diseases, as well as the injured, and is designed to meet the requirements for the placement of patients with severe diseases of the neurovascular and cardiovascular system, and is also the best choice for injured patients.

The base of the bed is a bed, made in the form of a frame structure with one stationary section and three functional sections, which are raised and lowered by an electric drive controlled by a remote control.

Bed bed – welded steel mesh with a diameter of 4 mm with a cell of 50×50 mm. Mesh metal base provides maximum ventilation of the under-mattress space. Removable bubbles and side panels made of laminated chipboard with a 2 mm thick plastic edge are attached to the frame.

The bed is equipped with folding side rails to prevent the patient from falling.

On the side parts of the frame, fastenings are made for mounting a tripod for long-term infusions. In the central part of the frame, hooks are fixed from below, allowing you to hang urinals.

The bed is a collapsible structure. Production of an all-welded design is possible.

All metal parts of the bed are covered with powder-polymer paint, resistant to disinfectants. All painted parts undergo chemical preparation (phosphatation) before coating, which makes the product coating more resistant to corrosion and durable in operation.

It is possible to paint the structure with paint of any color as agreed with the Customer.

All materials used in the manufacture of the device must be certified for use in medical practice.

The bed is mounted on four castors, two of which are equipped with brakes, 75 mm in diameter with gray non-marking gray tyres.

SPECIFICATIONS

• • Dimensions, mm:
• – height 840;
• – width 920;
• – length 2100;
• • Sizes of bed (mattress frame):
• – length – 2000 mm;
• – width – 900 mm;
• • Bed height from the floor (without mattress) – 450 mm;
• • Lifting angle of the main section from 0˚ to 70˚
• • Angle of elevation of the foot section – from 0˚ to 45˚
• • The mesh used in the production of the bed is electro-welded, 4 mm in diameter with a cell of 50 x 50 mm.
• • Management: electric
• • Maximum load – 180 kg.
• • Weight no more than 50 kg.