Bed medical 4-section KFM-4nb-3 basic

Bed for a bedridden patient KFM-4nb-3 basic medical functional 4-section

The bed medical functional 4-section is intended for use in medical institutions, medical hospitals, and also in house conditions. The bed is used to accommodate patients with various diseases, as well as injured and is designed to meet the requirements for the placement of patients with severe diseases of the neurovascular and cardiovascular system, and is also the best choice for injured patients.

The basis of the bed for the patient is a bed, made in the form of a frame structure with one static section and a functional head, femur and lower leg, which are raised and lowered using handles located at the back of the bed.

Bed spoon for the patient – welded steel mesh with a diameter of 4 mm with a cell of 50×50 mm

Mesh metal base provides maximum ventilation of the under-mattress space. Removable blades made of laminated chipboard with a plastic edge 2 mm thick are attached to the frame.

On the side parts of the frame, fastenings are made for mounting a tripod for long-term infusions. In the central part of the frame, hooks are fixed from below, allowing you to hang urinals.

The bed is a collapsible structure. Production of an all-welded design is possible.

All metal parts of the bed are covered with powder-polymer paint, resistant to disinfectants. All painted parts undergo chemical preparation (phosphatation) before coating, which makes the product coating more resistant to corrosion and durable in operation.

It is possible to paint the structure with paint of any color as agreed with the Customer.

All materials used in the manufacture of the device must be certified for use in medical practice.

The bed is mounted on four self-aligning wheels, two of which are equipped with brakes, 75 mm in diameter with a gray ham that leaves no marks.

SPECIFICATIONS

• • Dimensions, mm:
• – height 840;
• – width 920;
• – length 2100;
• • Sizes of bed (mattress frame):
• – length – 2000 mm;
• – width – 900 mm;
• • Bed height from the floor (without mattress) – 450 mm;
• • Lifting angle of the main section from 0˚ to 70˚
• • Angle of elevation of the foot section – from 0˚ to 45˚
• • Bed bed – welded steel mesh with a diameter of 4 mm with a cell of 50×50 mm.
• • Maximum load – 130 kg.
• • Weight no more than 50 kg.