Bed medical 4-section KFM-4nb-4 basic
Roll over image to zoom in
18,200.00 грн.
Безкоштовна доставка від 3000 грн
доставка у відділення
доставка кур`єром
доставка до поштомату
доставка кур`єром
доставка до поштомату
SPECIFICATIONS
- • Dimensions, mm:
- – height 840;
- – width 920;
- – length 2100;
- • Sizes of bed (mattress frame):
- – length – 2000 mm;
- – width – 900 mm;
- • Bed height from the floor (without mattress) – 450 mm;
- • Lifting angle of the main section from 0˚ to 70˚
- • Angle of elevation of the foot section – from 0˚ to 45˚
- • Bed bed – metal slats.
- • Maximum load – 160 kg.
- • Weight no more than 50 kg.
Technical data, photos, product colors are presented on the site for reference and may be changed by the manufacturer without prior notice.
Bed for a bedridden patient KFM-4nb-4 basic medical functional 4-section
It is intended for use in medical institutions, medical hospitals, as well as at home. The bed is used to accommodate patients with various diseases, as well as injured patients, and is designed to meet the requirements for accommodating patients with severe diseases of the neurovascular and cardiovascular system, and is also the best choice for injured patients.
The basis of the bed is a bed, made in the form of a frame structure with one static section and a functional head, femur and lower leg, which are raised and lowered using handles located at the back of the bed.
Bed bed – metal slats. The lamellar basis provides the maximum loading capacity of a design. Removable metal blades with chipboard inserts are attached to the frame.
On the side parts of the frame, fastenings are made for mounting a tripod for long-term infusions. In the central part of the frame, hooks are fixed from below, allowing you to hang urinals.
The bed is a collapsible design. Production of an all-welded design is possible.
All metal parts of the bed are covered with powder-polymer paint, resistant to disinfectants. All painted parts undergo chemical preparation (phosphatation) before coating, which makes the product coating more resistant to corrosion and durable in operation.
It is possible to paint the structure with paint of any color as agreed with the Customer.
All materials used in the manufacture of the device must be certified for use in medical practice.
The bed is mounted on four self-aligning wheels, two of which are equipped with brakes, 75 mm in diameter with a gray ham that leaves no marks.
SPECIFICATIONS
- • Dimensions, mm:
- – height 840;
- – width 920;
- – length 2100;
- • Sizes of bed (mattress frame):
- – length – 2000 mm;
- – width – 900 mm;
- • Bed height from the floor (without mattress) – 450 mm;
- • Lifting angle of the main section from 0˚ to 70˚
- • Angle of elevation of the foot section – from 0˚ to 45˚
- • Bed bed – metal slats.
- • Maximum load – 160 kg.
- • Weight no more than 50 kg.
Additional information
| Color | Gray color, Green water color, Oak sonoma color, Walnut dark color |
|---|
Reviews
There are no reviews yet.