Bed medical 2-section KFM-2nb-2 basic

Bed for the patient KFM-2nb-2 basic medical functional 2-section

The bed for the patient is intended for use in medical institutions, medical hospitals, and also in house conditions. The bed is used to accommodate patients with various diseases, as well as injured patients, and is designed to meet the requirements for accommodating patients with severe diseases of the neurovascular and cardiovascular system, and is also the best choice for injured patients.

The basis of the bed is a bed, made in the form of a frame structure with one static section and a functional main section, which is raised and lowered using a handle located at the foot of the bed.

False bed for the patient – welded steel mesh with a diameter of 4 mm with a cell of 50×50 mm

Mesh metal base provides maximum ventilation of the under-mattress space. Removable plastic formers are attached to the frame.

On the side parts of the frame, fastenings are made for mounting a tripod for long-term infusions. In the central part of the frame, hooks are fixed from below, allowing you to hang urinals.

The bed for the patient is a collapsible structure. Production of an all-welded design is possible.

All metal parts of the bed are covered with powder-polymer paint, resistant to disinfectants. All painted parts undergo chemical preparation (phosphatation) before coating, which makes the product coating more resistant to corrosion and durable in operation.

It is possible to paint the structure with paint of any color as agreed with the Customer.

All materials used in the manufacture of the device must be certified for use in medical practice.

The bed for the patient is mounted on four self-orienting wheels, two of which are equipped with brakes, with a diameter of 75 mm with a gray ham that does not leave marks.

SPECIFICATIONS

• Dimensions, mm:
• – height 840;
• – width 920;
• – length 2100;
• Bed dimensions (mattress frame):
• – length – 2000 mm;
• – width – 900 mm;
• The height of the bed from the floor (without mattress) – 450 mm;
• Lifting angle of the main section from 0 to 70
• The mesh used in the production of the bed is electrowelded, 4 mm in diameter with a cell of 50 x 50 mm.
• Maximum load – 130 kg.
• Weight not more than 50 kg.