Bed medical 2-section KFM-2nl-1
Roll over image to zoom in
9,950.00 грн.
Безкоштовна доставка від 3000 грн
доставка у відділення
доставка кур`єром
доставка до поштомату
доставка кур`єром
доставка до поштомату
SPECIFICATIONS
- • Dimensions, mm:
- – height 840;
- – width 920;
- – length 2100;
- • Sizes of bed (mattress frame):
- – length – 2000 mm;
- – width – 900 mm;
- • Bed height from the floor (without mattress) – 450 mm;
- • Lifting angle of the main section from 0˚ to 70˚
- • The mesh used in the production of the bed is electro-welded, 4 mm in diameter with a cell of 50 x 50 mm.
- • Maximum load – 130 kg.
- • Weight no more than 50 kg.
Technical data, photos, product colors are presented on the site for reference and may be changed by the manufacturer without prior notice.
Bed for the patient KFM-2n-1 medical functional 2-section
The bed medical functional 2-section is intended for use in medical institutions, medical hospitals, and also in house conditions. The bed is used to accommodate patients with various diseases, as well as injured patients, and is designed to meet the requirements for accommodating patients with severe diseases of the neurovascular and cardiovascular system, and is also the best choice for injured patients.
The basis of the bed for the patient is a bed, made in the form of a frame structure with one static section and functional head, which is raised and lowered using a handle located at the back of the bed.
Bed bed – welded steel mesh with a diameter of 4 mm with a cell of 50×50 mm. Mesh metal base provides maximum ventilation of the under-mattress space. Removable blades are attached to the frame, with inserts made of chipboard.
On the side parts of the frame, fastenings are made for mounting a tripod for long-term infusions. In the central part of the frame, hooks are fixed from below, allowing you to hang urinals.
The bed is a collapsible design. Production of an all-welded design is possible.
All metal parts of the bed are covered with powder-polymer paint, resistant to disinfectants. All painted parts undergo chemical preparation (phosphatation) before coating, which makes the product coating more resistant to corrosion and durable in operation.
It is possible to paint the structure with paint of any color as agreed with the Customer.
All materials used in the manufacture of the device must be certified for use in medical practice.
SPECIFICATIONS
- • Dimensions, mm:
- – height 840;
- – width 920;
- – length 2100;
- • Sizes of bed (mattress frame):
- – length – 2000 mm;
- – width – 900 mm;
- • Bed height from the floor (without mattress) – 450 mm;
- • Lifting angle of the main section from 0˚ to 70˚
- • The mesh used in the production of the bed is electro-welded, 4 mm in diameter with a cell of 50 x 50 mm.
- • Maximum load – 130 kg.
- • Weight no more than 50 kg.
Additional information
| Color | Gray color, Green water color, Oak sonoma color, Walnut dark color |
|---|
Reviews
There are no reviews yet.