Gynecological chair KG-2m LATTE (electric, transforms into a couch or table) TM OMEGA

The gynecological chair is intended for carrying out gynecological examinations, manipulations, as well as minor surgical interventions in specialized rooms of hospitals and clinics. Can be used in urological and proctological practice.

The design of the chair allows you to comfortably position the patient for examination, transform into a couch for ultrasound or procedures, or an operating table for manipulations or surgical interventions.
The chair consists of a stand, seat, backrest and removable components and accessories.

The frame has hinged seats and a backrest that can change the angle of inclination. The seat and backrest can be tilted and fixed in the desired position using the control panel or pedals. The seat height is also adjustable using the remote control or pedals. The chair bed can be installed in a horizontal position, as well as in the Trendelenburg position.
Under the seat there is a retractable shaved section, used when using the chair in a horizontal position, as an examination couch, or when using the chair as an operating table.

Leg supports. Ergonomic seamless resistance made of polyurethane foam, the design of which prevents the patient’s legs from slipping during examination or manipulation. Support brackets, locks and fasteners are made of high quality stainless steel. The design of the supports allows them to be installed at a convenient height at any angle and secured using a special clamp on the rail with adjustment in the front-rear direction.

Seat and back upholstery material. The back and seat are covered with seamless high-quality vinyl leatherette with polyurethane foam lining. The coating allows disinfection with all known antiseptics and is resistant to abrasion and mechanical stress.

Capacity. The chair is equipped with a removable gynecological container made of stainless steel, mounted on a retractable bracket, which slides under the seat when not in use.

Reiki. Specialized universal rails for installing options (infusion stand, supports, clamps, etc.) on the sides of the seat.

Armrests. The sides of the seat are equipped with armrests with soft pads that can be folded down or fixed to the working position. The armrests have soft ergonomic pads made of non-slip polyurethane foam.

Specifications:

• The height of the chair above the floor with the bed in a horizontal position: 630-940 mm.
• The height of the chair above the floor with the backrest vertical: 1330-1640 mm.
• Chair seat width: 600 mm.
• Seat width along the guide rails: 640 mm.
• Chair back width: 600 mm.
• Backrest tilt angle relative to seat: 0˚- 70˚
• Seat angle: 0˚/+25˚
• The length of the chair panel in the unfolded position is 1270 mm.
• Longitudinal inclination (Trendelenburg): – 25˚
• Maximum permissible load on the chair: no more than 150 kg
• Average service life before decommissioning: 10 years